Gate Of Underworld Coffin Ring
Size Guide
RING SIZING
IF YOU HAVE A PRINTER
- Right-Click on the image above and select ‘Save Image As.’
- Print the image at 100% scale (ensure scaling is turned off).
- Measure the grey bottom section — it should be 3.5 inches from end to end.
- Cut out the sizing tool (the top section), and wrap the piece of paper around the desired finger.
- The number that aligns closest with the ‘Read Size Here’ line will be your size (Note: if you are in between two sizes, it is best to round up rather than down).
IF YOU DO NOT HAVE A PRINTER
- Cut a strip of paper or a piece of string. Wrap the paper or string around the finger to be sized.
- Use a pen to mark the string on paper where the long end overlaps. Measure the mark from the end of the length of paper on string with a ruler.
- Locate your ring size by locating your measurement on the chart. If the measurement falls in between two sizes, it is recommended that you choose the larger size.
RING SIZING CHART
| Length (mm) | 44 | 47 | 49 | 52 | 55 | 57 | 60 | 62 | 65 | 67 | 70 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| Ring Size (US) | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 |
| Ring Size (UK & AUS) | F | H | J½ | L½ | N½ | P½ | R½ | T½ | V½ | X½ | Z1 |
| Ring Size (EUR) | 44.2 | 46.8 | 49.3 | 51.9 | 54.4 | 57.0 | 59.5 | 62.1 | 64.6 | 67.2 | 69.7 |
| Ring Size (East Asia) | 4 | 7 | 9 | 11 | 14 | 16 | 18 | 20 | 23 | 25 | 27 |
BRACELET SIZING
- Measure your wrist just below the wrist bone, where one would normally wear a bracelet, with a flexible measuring tape, string, or a strip of paper.
- In inches, measure from the end of the paper strip or string to the marking you have made to determine your wrist size.
- Add 1/4 inch to 1 inch to your wrist size, depending on whether you would like a snug, comfort, or loose fit.
*If product is in cm, do the same steps in cm and add 0.5cm to 2.5cm to your wrist size.
CHAIN SIZING
Ⰶ FREE GIFT ON ALL ORDERS OVER $100+
★★★★★ Trusted by 300,000+ collectors worldwide.
✦ FREE STANDARD SHIPPING $40+
✦ NO TAX & IMPORT DUTY
✦ COMPLIMENTARY LIFETIME WARRANTY
✦ 30 DAY RETURNS + EXCHANGES
The Gate Of Underworld Coffin Ring is a non traditional ring due to its unique design. You can see the steps that progress through it's layers, which we named after the "Gate Of Underworld Coffin Ring!" The coffins are like stairs leading you down into darkness - if death isn't enough for your heart's desire then this piece might just do the trick...
- Material: 316L Stainless Steel
Forged in Depth. Defined by Darkness.
Jewelry that outlasts time — designed to be worn, not stored.
✦ Forged for Endurance — .925 sterling silver & 316L stainless steel that never fades.
✦ Handcrafted Obsession — every curve, clasp, and stone shaped by hand.
✦ Dark Luxury — water-resistant, sweatproof, built for every realm.
✦ Metal That Never Dies.
Forged in Chrome, Worn by You
Real edge. Real stories. See how the Chrome Cult community makes each piece their own.
